What to do if the label stock jams during printing with my CAB Label Maker?
If the label stock jams during printing, you should: * Clear the paper jam. * Remove any label material left on the thermal print head. * Clean the print head using a soft lint-free cloth dipped in alcohol.
Why is the printed image blurred on my CAB MACH1 Label Maker?
If the printed image is blurred, check the darkness setting and the thermal print head for dust or dirt.
How to fix a CAB MACH1 Label Maker that feeds labels but doesn't print?
If the label stock passes through the printer but no image is printed, make sure that the label stock is loaded the right way up and that it is suitable material. Also, choose the correct printer driver, the correct label stock, and a suitable printing mode.
How do I correct the printed image position on my CAB MACH1 Label Maker?
If the printed image is positioned incorrectly, check whether there is paper or dust covering the sensor, whether the label stock is suitable, and the paper guide settings.
Why are there missing parts in the printed image on my CAB MACH1 Label Maker labels?
If there is no printed image on some parts of the label, check whether any label material or ribbon is stuck to the thermal print head. Also, check for errors in the application software, whether the starting position has been set correctly, and the ribbon for wrinkles.
Why is my CAB Label Maker skipping labels during printing?
If a label is missed out during printing, check the label height setting and whether there is dust covering the sensor. You may also want to run the auto-detection function.
What causes a partial or blurred image on my CAB Label Maker?
If there is no printed image on part of the label or the image is blurred, check the thermal print head for dust or other dirt. Also, use the internal “~T” command to check whether the thermal print head will carry out a complete print job, and check the quality of the print medium.
What does it mean when the LED on my CAB MACH1 Label Maker is red and printing stops?
If the LED lights up red and printing is interrupted, check the software settings (driver settings) or command codes. Look for the error alert and check whether the print mechanism is closed correctly.
What to do if my CAB MACH1 Label Maker is on but the LED is not lit?
If the printer is switched on but the LED does not light up, check the power supply.
Details the proper and improper usage of the printer, including safety regulations.
Details safety precautions for operating the printer, including electrical, environmental, and handling guidelines.
Guides on how to connect the printer to the power supply and a computer.
Guide to installing the necessary printer driver from the product DVD or via USB.
How to use the Mach1/2-Load tool to manage and configure printer settings and interfaces.
Explanation of LED indicators, beep signals, and their corresponding error messages and solutions.
Procedure for calibrating label height and performing a self-test to check printer functionality.
A guide to diagnosing and resolving common problems encountered with the printer's operation.
General| Interfaces | Ethernet, USB, Serial |
|---|---|
| Connectivity | Ethernet, USB, Serial |
| Printing Method | Thermal transfer / direct thermal |
| Memory | RAM 64 MB, Flash 8 MB |
| Display | LCD |
| Keyboard | Optional |
| Power Supply | 100-240 V, 50/60 Hz |
| Dimensions | 253 mm x 288 mm x 460 mm |
| Weight | Approx. 12 kg |
To Next Page
