To Next Page

To Previous Page

6 Operation

6.1 Operation Panel

Operation Panel Overview

3 4

1 2

1 LED Power

2 LED Status

3 POWER Button

4 FEED Button

Fig. 19 Operation Panel Overview

POWER Button

 Press the POWER button (3) and the LED Power (1) lights up green. The printer is on “ Ready to print “ status

now.

 When printer is turned on, keep pressing the POWER button (3) until the LED Power (1) lights off will turn the

printer off.

FEED Button

WhenyoupresstheFEEDbutton(4),theprintermovesthelabeltothedenedstopposition.

If you are using continuous labels, pressing the FEED button will move label stock until you release the button again.

If you are using individual labels, pressing the FEED button will move only one label.

Note!

If the label does not stop at the correct position, you need to run the auto-detection function on the label

stock.  6.3 on page 23.

LED Indicators

LED Indicator Status Description

Green Standby / Status OK The printer is ready for operation.

Red Error The printer has detected an error.

 6.2 on page 22

Table 1 Status LED Indicators

CAB MACH1 User Manual

Questions and Answers: