Need help?Do you have a question about the CAB PX Q4 and is the answer not in the manual?
General| Print Method | Thermal transfer |
|---|---|
| Interfaces | USB |
| Label Material | Paper |
| Connectivity | USB |
| Display | LCD |
| Power Supply | 100-240V AC, 50/60Hz |
Connecting the printer to a network using an Ethernet cable.
Steps to establish a Wi-Fi connection for the printer.
Connecting the printer using a USB interface.
Details the function and usage of the service key for special access.
Configuring printer settings directly through the control panel.
Configuration of print settings like heat level and print speed.
Settings related to label detection and media handling.
Configuration options for the ribbon, including monitoring and tension.
Settings for the labelling process, including transfer modes and timing.
Configuration of network and serial interfaces (Ethernet, Wi-Fi, RS-232).
Setting up printer parameters using a web browser interface.
Configure printer parameters via the web interface's setup section.
Manage printer security settings and access rights via the web interface.
Print a status report containing configuration and operational data.
View detailed status information concerning the printer's printhead.
View a log of events like hardware faults, firmware updates, and resets.
Update the printer's firmware using files from external storage.
Reset the printer's service counter for maintenance tracking.
Align print image perpendicular to paper flow for printhead tolerances.
Align print image in paper flow direction for printhead tolerances.
Update printer firmware using FTP.
To Next Page
