CAB PX Q4 - 11.4 Printer Model Selection

53
11.4 Printer Model
Access only with service key inserted!
With the Printer model functionthermwarecanbeadaptedtothedevicetype.
 Start menu.
 Select Service > Printer Model.
 Select a model.
Following the Info function, all test prints and the web interface show the selected printer model.
11.5 No Branding
Access only with service key inserted!
With the activation of the No branding parameter the cab Logo in the display can be suppressed.
 "3.2" on page 12
 Start menu.
 Select Service > No branding.
 Activate the parameter.
11 Service Menu