Need help?Do you have a question about the CAB HERMES Q2L and is the answer not in the manual?
General| Brand | CAB |
|---|---|
| Model | HERMES Q2L |
| Category | Label Maker |
| Language | English |
Explains document notation for warnings, notes, and references.
Defines the printer's purpose and restrictions for safe operation.
Details critical safety information for operating the device.
Identifies and explains safety symbols and warning labels on the device.
Provides guidelines for recycling and disposal of the device.
Illustrates and labels the main components of the HERMES Q printer.
Step-by-step guide for unpacking and initial printer setup.
Instructions for connecting the printer to power and networks.
Procedure for powering on the printer after connections.
Describes the initial display and its elements when the printer starts.
Explains how to navigate through the printer's menu system.
Instructions for preparing and loading label material onto the printer.
Step-by-step guide for placing the label roll correctly.
Detailed process for feeding labels into the print mechanism.
How to adjust the label sensor for accurate detection.
Instructions for routing the label liner to the rewinder.
Adjusting the printhead plungers for label width.
Adjusting the peel-off edge for optimal label separation.
Step-by-step guide for installing the thermal transfer ribbon.
Adjusting the ribbon path to prevent wrinkling.
Precautions to prevent damage to the printhead during operation.
Process to align label feeding with the print mechanism.
Explains the mode where labels are peeled off after printing.
Description of the feature to conserve transfer ribbon.
General advice and precautions for cleaning the printer.
Procedure for cleaning the print roller to ensure print quality.
Detailed instructions for safely cleaning the printhead.
How error messages are presented on the printer's display.
Lists common error messages, causes, and remedies.
Provides solutions for common operational problems and print quality issues.
Technical specifications for label width, height, and spacing.
Physical measurements and critical distances for the printer.
Specifications related to the use of reflex marks for label sensing.
Specifications for cut-out marks used for label positioning.
Legal statement regarding the printer as incomplete machinery.
Statement of compliance with EU directives for electromagnetic compatibility.
Statement on compliance with FCC regulations for digital devices.
To Next Page
