Need help?Do you have a question about the CAB eos 4 and is the answer not in the manual?
General| Brand | CAB |
|---|---|
| Model | eos 4 |
| Category | Label Maker |
| Language | English |
Explains symbols like Danger, Warning, Attention, Notice for safety and guidance.
Details connecting the printer via Ethernet interface, including network setup.
Explains how to connect the printer using a USB interface and driver installation.
Describes connecting the printer via an optional RS-232 interface adapter.
Guides on setting up a wireless LAN connection for the printer using a USB adapter.
Details the process of setting up a Bluetooth connection with a USB adapter.
Outlines the hierarchical structure of the printer's offline menu and its options.
Explains how to navigate through the printer's offline menu using its controls.
Describes the purpose and usage of the service key for accessing special printer functions.
Details how to configure printer settings using the device's physical control panel.
Covers language, country, timezone, daylight saving, date, time, and keyboard settings.
Details settings for printhead position, tear-off, peel, cutter, and display/speaker.
Explains settings for heat level, print speed, transfer print, label sensor, and print modes.
Covers network, RS-232, and default storage interface configurations.
Allows selection of widgets (Clock, Date, etc.) displayed on the printer's status line.
Covers PIN activation for protecting setup menus and firmware updates.
Instructions on how to access the printer's web interface using a browser.
Describes the main tabs (Status, Setup, Interpreters, Notifications, Devices, Fonts, Help).
Information displayed in the Status tab, including printer type, operative time, and events.
Details parameters configurable via the Setup tab, including locale, machine, print, and interfaces.
Configuration of hostname, IP, LPD, SNMP, SOAP, and time services via web interface.
Setting passwords for web interface, FTP, and PIN protection.
Configuring interfaces for JScript or ZPL data interpretation.
Setting up SNMP or email alerts for status and error messages.
Overview of installed hardware components and connected peripheral devices.
Listing of available fonts, their parameters, origin, and format.
Accessing help functions like transmitting status reports and checking for updates.
Provides quick status information on printer type, firmware, operative time, and network details.
Prints configuration and status information, useful for diagnostics.
Lists parameters of available fonts, including original and loaded fonts.
Details hardware components and connected peripheral devices.
Lists accessible Wireless Access Points and their parameters.
Checks incoming control sequences at an interface, printing commands as text.
Performs label advance to check label detection with the label sensor.
Displays saved printer events like hardware faults and firmware updates.
Guides on updating printer firmware using a USB storage device.
Restores printer configuration from a saved file on a storage device.
Saves the current printer configuration to a storage device (USB, IFFS).
Resets all setup parameters to factory defaults, excluding passwords.
Resets the printer's service counters for maintenance tracking.
Resets web interface and FTP passwords to default values.
Saves printer settings and executed processes to a log file on storage.
Provides an overview of PPP status information.
Loads PPP vouchers from a USB flash drive into the printer.
Describes loading PPP vouchers via FTP, COPY command, or cabFirmwareUpdater.
Details how to establish an FTP connection using user name and IP address.
Explains direct printing of label files via FTP connection.
Manages files on storage devices via FTP connection.
Outlines the process of updating printer firmware via FTP.
Lists compatible external (USB) and internal storage devices.
Steps for installing and recognizing external storage devices.
Shows the automatically generated folders on USB flash drives.
Methods for writing data to storage devices, including direct programming.
Prints saved label descriptions from the storage device.
Creates and prints a list of files stored on the default storage device.
Deletes all data and reformats external storage devices.
How to connect a compatible HID USB keyboard to the printer.
Setting keyboard layout based on country or switching assignments.
Describes general functions assigned to special keys like F1-F8.
Key functions for navigating the offline menu and entering variable data.
Using the utility to transfer firmware and PPP files to the printer via USB/Ethernet.
To Next Page
