Need help?Do you have a question about the CAB HS Series and is the answer not in the manual?
General| Brand | CAB |
|---|---|
| Model | HS Series |
| Category | Label Maker |
| Language | English |
Describes the device's primary function as a semiautomatic label dispenser for manual processing.
Explains warning symbols (Danger, Warning, Attention, Notice) and icons used within the documentation.
Details the device's specific intended application and defines actions considered improper use.
Provides essential safety guidelines for operating the device, including electrical and environmental precautions.
Offers guidance on recycling obsolete devices and protecting the environment during disposal.
Illustrates and labels the main components of the HS/HS+ and VS/VS+ label dispenser models.
Guides the user through unpacking the device, initial setup, and checking the delivery contents.
Explains the procedure for connecting the device to a suitable power source.
Details how to connect the device to an external control system via the peripheral port.
Step-by-step instructions for correctly loading label rolls onto the dispenser for both HS/HS+ and VS/VS+ models.
Instructions on how to adjust the present sensor's position for accurate label detection and peeling.
Explains the basic operation procedure for HS/VS models, including powering on and taking labels.
Provides troubleshooting steps for common HS/VS errors like 'Out of labels' or sensor detection issues.
Covers switching on, initial device states, and selecting operation modes for HS+/VS+ models.
Describes how to select and use different operational modes like 'Automatic Peel-Off' and 'Peel-Off on Demand'.
Instructions for adjusting the device's operational speed using the control panel buttons.
Explains how to reset the integrated label counter using the CLR button.
Details remedies for HS+/VS+ errors such as material transport interruption or sensor issues.
Guides the user on adjusting the dispense plate for optimal label material alignment and run.
To Next Page
