CAB HS Series - Device Operation and Troubleshooting; HS;VS Basic Operation

12 124 Operation
4.1 HS / VS
4.1.1 Operation
 Switch the device on at the power switch (1 / Fig. 3).
The green LED (2) lights up.
The rst label will immediately be fed to the peel position.
 Take the label.
The next label will be fed to the peel position.
!
Attention!
Risk of unintended start-up.
 Do not touch the feeler of the present sensor excepting the
error treatment.
1
2
Display
1 Error
2 Ready / Label in peel position
Fig. 9 Control panel HS / VS