CAB HS Series User Manual

1312
4.1.2 Error Treatment
If no label is detected by the present sensor within 5 seconds after starting
the peel-off operation, the label transport will be stopped and an error will be
signalized :
• The red LED (1) is ashing.
Cause Remedy
Out of labels Insert new material
The peeled label does not activate
the present sensor
Adjust present sensor
Table 2 Fault Correction
 Rectify error.
 Continue operation by releasing the present sensor manually.
4 Operation

CAB HS Series Specifications

General

Brand	CAB
Model	HS Series
Category	Label Maker
Language	English