CAB Hermes Series User Manual

cab - Produkttechnik GmbH C-1
Appendix C - Spare Parts List (Extract)
Part.-No. Description Hermes
4N 5N 4F 5F
5521552 Spring x x x x
5521553 Wall Spacer x x
5521555 Shell x x x x
5521560 Rewinder End Cap x x x x
5521561 Shell x x x x
5521564 Rewinder Wall Plate x x x x
5530376 Friction Felt x x x x
5537643 PCB CPU Hermes 4/5 F x x
5537666 Backfeed Locking System x x x x
5537667 Label Sensor Assy. x x x x
5537698 Backfeed Roller x x x x
5537730 Wall Spacer x x
5537752 Printhead x x
5537753 Main Drive Motor x x x x
5537754 Ribbon Sensor Board x x x x
5537760 PCB CPU Hermes 4/5 x x
5537762 Stepper Motor x x x x
5537770 Transport Roller x x x x
5537771 Print Roller x x x x
5537775 Transport Locking Roller x x x x
5537845 PCB Driver Electronics x x x x
5537848 PCB Printhead Adapter x x
5537996 PCB Warning x x x x
5560434 Printhead NM3004-UA21B x x
Wearing parts are printed bold

CAB Hermes Series Specifications

General

Display	LCD with backlight
Cutter	Optional
Dispenser	Optional
Print Technology	Thermal Transfer
Resolution	203 dpi, 300 dpi, 600 dpi (depending on the model)
Interfaces	USB, Ethernet, Serial
Memory	64 MB RAM, 128 MB Flash
Media Types	Labels, continuous media
Supported Barcode Types	Data Matrix, QR Code
Max Print Width	4.09 inches (104 mm)