CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 1
1
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
Programming Manual
Thermal / Thermal Transfer Printers
valid for Apollo - Series and Hermes - Series
Edition 5.1 / 2005
Apollo - Series
Hermes - Series
( Hermes A is decribed in a separate Programming manual )

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm

Summary

CHAPTER 1 - Overview

Instruction types

Explains the three main types of printer instructions: ESC, lowercase, and uppercase.

Special Content Fields

Introduces fields for data insertion and manipulation within label formats, enclosed in brackets.

Programming cab printers - a simple lesson

A step-by-step tutorial for creating a basic label using printer commands.

Command Overview

ESC Commands

Lists and describes ESC (Escape) commands for printer control.

Immediate Commands

Details commands executed immediately, used for adjustments and settings.

Label Format Commands

Commands for defining label structure and content using uppercase letters.

CHAPTER 5 - Special Content fields

APPENDIX

ASCII Table

A reference table listing ASCII control characters with their decimal, hex, and ASCII values.