CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 35
35
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
ESCp1 Set printer into pause mode
causes the printer immediately to set the pause mode. This command has the same function such as
pressing the "PAUSE" button on the printer
ESCp1
Syntax:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm