Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 117
117
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
C - Cutter Parameters
Using the Cutter command "C" together with Replace commands "R" (See also "Replace Field
Command" offers additional possibilities.
The next sample shows the usage of the cutter
J
S l1;0,0,68,71,100
T 12,25,0,3,9;cut after 5 labels
C 5
A 100
R cut after 2 labels
C 2
A 60
cuts the first print job of 100 labels after each 5th and in the second job with a total amount of 60
labels every 2. label will be cut.
Example:
x-
To Next Page
Loading...
