CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 57
57
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
s - set Date/Time
used to set date and time temporarily to be recalled on a label.
The printer´s internal clock chip and enables the user to recall time or date from the printer´s internal
clock.
This is useful when the printer is driven in "Stand Alone" mode.(Options required for the usage in
Stand Alone mode)
s n[ss] CR
s = Set date / time command.
n= ASCII - string in following format to adjust date and time in the printer of
following format: YYMMDDhhmmss
YY = Year - 2 digits
(values between 70 and 99 are interpreted as
1970-1999. Anything else is treated as year2000)
MM = Month. - 2 digits
DD = day - 2 digits
hh = hour - 2 digits
mm = minutes - 2 digits
[ss] = seconds - 2 digits
(setting of ss is optional)
s 031105091500
Sets printer date and time to:
November 24, 2003 9:15 a.m.
Syntax:
Example:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm