Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 37
37
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
ESCs Printer status query
Note: Immediately when a job has started the printer will send a Y and sets this value back to N when
the last label of this job is printed.
(1) A status request can only be processed through the serial interface on Apollo and Hermes with an
attached applicator !
(2)Error messages for optional devices such as "cutter jammed" depend on the availability of the
optional device and may vary between different printer types. i.e. No cutter errors on Hermes
applicators (These option is not available for Hermes)
(3) Ribbon saver malfunction - Only available on Apollo 1 and Hermes
(4) Network error -only on printers with an optional or built in network interface. (No print server)
!!
To Next Page
Loading...
