Apollo Hermes
command
available ?
112 cab Produkttechnik GmbH & Co KG
112
PRODUCT MARKING AND BARCODE IDENTIFICATION
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
B - Barcode UPC-E
Barcode type: UPC-E
Length: fixed - 8 digits
Valid characters: numeric,
digits: 0-9,
check digits: yes (Mod 10)
ratio oriented: no
UPC-E is a retail barcode with a fixed length of 8 digits.The 8th digit is a
modulo 10 check digit. cab printers require only 7 digits.The 8th digit is calculated
by the printer.
B[:name;]x,y,r,UPCE[+options],height;ne,text
CR
[+options] = +WSarea,
White Space area prints quiet zone markers around the bar
code, to make sure that the barcode can be read after printing.
This option is for design purposes only and should be removed
after the label is programmed.
+XHRI,
+XHRI (Extended Human Readable Interpretation) Reduces the
size of the barcode (see the example)
Height and narrow element (ne) can be replaced by an SC
value(see example on the next page)
SCx,
sets the size of the barcode to a defined standard code size.
x is a numeric value (0-9) and the possible barcode size
depends on the printer´s resolution. Used instead of height and
ne (narrow element)
Syntax:
xx
To Next Page
Loading...
Need help?
General
