Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 53
53
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
p - pause Printer
The printer is set in the pause mode or removes it from pause - depending on the parameter.
p n
CR
n = 0 Pause off
n = 1 Pause on
p 1
Sets the printer into pause mode, if a print job runs, it will stop after the label is printed.
The Pause LED lights on the front panel.
Syntax:
Example:
xx
To Next Page
Loading...
