CAB Apollo Series User Manual

Apollo Hermes
command
available ?
106 cab Produkttechnik GmbH & Co KG
106
PRODUCT MARKING AND BARCODE IDENTIFICATION
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
B - Barcode Plessey
Barcode type: Plessey
Length: variable
Valid characters: A-F and 0-9
check digits: no
ratio oriented: no
Plessey Barcode is a seldom used barcode which encoding possibilities are
limited, as only numbers an 6 characters are encoded
B[:name;]x,y,r,PLESSEY,[+options],height,ne,ratio;text CR
[+options] = +WSarea,
White Space area prints quiet zone markers around the bar
code, to make sure that the barcode can be read after printing.
This option is for design purposes only and should be removed
after the label is programmed.
+BARS,
Prints boundary lines above and below the barcode. Can be
used for a better readability. Helps to avoid erroreous readings
of this barcode.
Syntax:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm