CAB Apollo Series - E - Erase Data

Apollo Hermes
command
available ?
46 cab Produkttechnik GmbH & Co KG
46
PRODUCT MARKING AND BARCODE IDENTIFICATION
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
e - erase data
The e command is used to erase data from the printer´s memory, such as fonts and graphics.
Data on the memorycard will not be affected by this sequence. Separate commands are available
for erasing files from the memory card. (see "M" command)
e type;name CR
e = erase data command
type = The file types being removed, with following valid file
extensions:
BMP,FNT,GIF, IMG,MAC,PCX,TIF,TTF.
name = The name attached to the font or graphic when it was
sent to the printer. A wildcard ( * ) may be used to
delete all files of the same type.
e FNT;*
Erases all true type fonts which are currently in the printer’s memory.
Syntax:
Example:
xx