CAB Apollo Series User Manual

Apollo Hermes
command
available ?
62 cab Produkttechnik GmbH & Co KG
62
PRODUCT MARKING AND BARCODE IDENTIFICATION
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
z - print slashed / unslashed zero
The default setting for the zero character is unslashed. With this command the printer can be forced
to change the style of the zero character. It can be printed as 0 (unslashed) or Ø (slashed).
This command can only be used with internal bitmap - fonts. It is not available for internal vectorfonts
(Swiss, Monotype) or for truetype fonts: The selected method is valid for the complete label.
z t CR
z = Select slashed zero
t = 0 - (zero - prints slashed zeros (Ø) )
t = O -(upper case letter O - prints unslashed zeros (0) )
z0
J
S l1;0,0,68,71,100
T 25,25,0,-3,x9,y9;1000
A1
Prints the number 1000 with slashed zeroes.
Syntax:
Example:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm