CAB Apollo Series User Manual

Apollo Hermes
command
available ?
56 cab Produkttechnik GmbH & Co KG
56
PRODUCT MARKING AND BARCODE IDENTIFICATION
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
r - reset to default values
This command resets JScript to the printer´s default values.
- resets the language
- resets slashed zero setting
- resets the selected measurement system
- erases the fontcache
r CR
Syntax:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm