CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 47
47
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
f - formfeed
This command feeds the media forward until the top-of-form of the next label reaches the printhead.
It does the same as pressing the FormFeed button on the printer´s control panel.
This process is controlled by the label photocell if die cut label material is used. The printer feeds the
material in continuous form mode in the lentgh which had been selected for the last printed label.
f CR
f CR
f CR
feeds 2 labels
Syntax:
Example:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm