CAB Apollo Series User Manual

Apollo Hermes
command
available ?
2 cab Produkttechnik GmbH & Co KG
2
PRODUCT MARKING AND BARCODE IDENTIFICATION
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX][ESC][i][L][S]
cab Programming Manual
valid for following printer types:
Apollo-Series
TM
and
Hermes-Series
TM
copyright © cab Produkttechnik GmbH & Co KG
all rights reserved
No parts of this manual may be copied, rewritten or used for anything else
than for original cab printers.
This interdicts the usage of the manual for OEM products
unless you have a written permission.
The cab printers command language JScript © is owned and copyrighted by
cab Produkttechnik GmbH & Co KG
cab Produkttechnik GmbH & Co KG
Wilhelm Schickard Str. 14
76131 Karlsruhe / Germany
Tel: ++49 - 721-6626-0
Fax:++49 - 721-6626-239
Email: support@cabgmbh.com
http://www.cabgmbh.com
All registered trademarks or product names are trademarks of their respectives companies
Swiss
TM
is registered Trademark of Bitstream Inc.

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm