CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 137
137
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
M - Memory Card Access
The M commands defines the possibilities of memory card access. (The memory card is an optional
equipment).
This command is used to save and recall data on memory card, it is used to format the memory card
and erase data on memory card.
A memory card is normally used, if a printer runs in "Stand Alone Mode" .
Furthermore some applications use the memory card to recall labels for printing and send the variable
field contents from an other application.
This is one of the methods which is often used to connect cab printers to SAP or to IBM mainframe
computers.
M variations...
The "M" command is available in some variations which are described on the next pages.
Syntax:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm