CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 199
199
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
[DBF:... ] Database file access
[DBF:key,keyvalue,entryfield]
Command to access data from a DBase IV
TM
compatible database on the optional memory card.
key = Search value of the database
keyvalue = is defined by the alphanumeric value in the actual record
entryfield = transmits the value of the actual record
[DBF:NUMBER,NUMBERTA,ARTICLE]
Searches in the database for the keyvalue NUMBER, in the table NUMBERTA and transmits the
value of ARTICLE.
The" E "command must be defined,before this command can be used.
Only one database can be used at the same time in a label.
This function makes only sense if small databases are used.
Syntax:
Example:
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm