CAB Hermes Series User Manual

53cab - Produkttechnik GmbH
System Mode PAUSE
FF key Provides label feed. The leading edge of the next label to be
printed is in position.
CAN key Cancels the current print job,
Switch into ONLINE mode (LED PSE off)
PSE key Continues the current print job,
Switch into PRINT mode (LED PSE off)
ONL key Switch into OFFLINE mode
FF key For scrolling down within the file list stored on the card.
Reduces the quantity of labels to be print.
CAN key For scrolling up within the file list of the card.
Increases the quantity of labels to be printed.
PSE key Confirms file selection.
Moves the cursor to be right when setting the quantity of labels
to print.
Switch into PRINT mode
System Mode LABEL FROM CARD

CAB Hermes Series Specifications

General

Display	LCD with backlight
Cutter	Optional
Dispenser	Optional
Print Technology	Thermal Transfer
Resolution	203 dpi, 300 dpi, 600 dpi (depending on the model)
Interfaces	USB, Ethernet, Serial
Memory	64 MB RAM, 128 MB Flash
Media Types	Labels, continuous media
Supported Barcode Types	Data Matrix, QR Code
Max Print Width	4.09 inches (104 mm)