52 cab - Produkttechnik GmbH
ONL key Switch into OFFLINE mode (LED ONL off)
FF key Provides label feed. The leading edge of the next label to be
printed is in print position.
CAN key Deletes data of the previous print job in internal memory.
Following that, "Pause reprint" is not available.
(see PSE key)
PSE key Repeats the print of the last label, after the previous print job has
been completed. (only if setup parameter 'Pause reprint' is on)
ONL key Pressing both keys together for at least 5 seconds will switch
+ into the SETUP mode.
CAN key (LED ONL off)
System Mode ONLINE
ONL key Switch into ONLINE mode (LED ONL on)
FF key Provides label feed. The leading edge of the next label to be
printed is in print position.
CAN key Switch into LABEL FROM CARD mode.
(only if memory card is installed and formats are stored it)
PSE key Display shows current printer mode
System Mode OFFLINE
System Mode PRINT
CAN key short pressing : Cancels the current print job,
Switch to the next job in the input buffer
longer pressing (>1s): Cancels the current print job,
Deletes the input buffer
(LED CAN blinks),
Switch into ONLINE mode
PSE key Interrupts the current print job,
Switch into PAUSE mode (LED PSE on)
To Next Page
Loading...
Need help?
General
