A-3cab Produkttechnik GmbH & Co KG
M4 Appendix A - Operation in Peel-off Mode
Loading Labels
Loading of labels for Peel-off Mode is described in the chapter "Media
Loading".
Operation
The printer is ready for operation if all connections have been made and all
materials are loaded correctly.
NOTICE !
After loading the media it is necessary to locate top of form by pressing
the key. Remove the dispensed labels manually from the dispense
plate.
NOTICE !
To operate the present sensor the peel-off mode must be activated in the
software !
For direct programming use the P-command (see Programming Manual) !
To Next Page
Loading...
