CAB M4 - Structure of the FTP Server; Administration of the Memory Card

98 cab Produkttechnik GmbH & Co KG
M4
Structure of the FTP Server
Administration of the Memory Card
NOTICE !
Make sure before accessing the memory card that the printer is in the
Online mode. You can check the status of the printer by using the
"Status" tab on the printer's web-page.
Download
A download of the files stored on the memory card can take place using both
the "anonymous" log-in and the "root" log-in. The screen will display the
different file types and structure of the card files.
Upload
For uploading to the card, it is necessary to log-in as "root. In order to upload
label files, they must have the extension of .LBL. When copying the files onto
the memory card, the files will be automatically sorted after the file upload
takes place.
Fig. 10g Structure of the FTP Server
The files accessible over the FTP are divided into two separate directories.
The "card directory contains the files that are stored on the memory card
installed in the printer.
The "system directory contains the firmware of the printer as a file.
10. Network Printer Functions