99cab Produkttechnik GmbH & Co KG
M4
FTP Fimware Update
NOTICE !
Make sure the printer is in the Online mode before attempting a firmware
update. You can check the printer's status by using the printer's web-
page under the "Status" tab.
In order to upload the firmware update, you must be logged-in as "root" (see
"FTP Log-on paragraph").
1. Configure the FTP Client for "Binary transfer mode.
2. Open the "system" folder
3. Copy a valid firmware file (I.E. 287_3921.m4) into the "system" folder.
4. After the file has uploaded correctly, the printer will reset.
The success of the firmware update can be checked using the Printer's web-
page and the "Status" tab.
10. Network Printer Functions
To Next Page
Loading...
