CAB M4 - Memory Card Installation and Removal

102 cab Produkttechnik GmbH & Co KG
M4
Installation and Removing the Memory Card
With the CompactFlash card contacts facing the slot (1), insert the card (2) into
the slot (1).
NOTICE !
There are guides on the sides of the memory card which make it
impossible to insert the card incorrectly.
For removing pull the card out of the slot (1).
CAUTION !
To avoid loss of data on the memory card at removing, make sure, that
the printer does not access the card at this moment !
1
2
Fig. 11b Installation of the Memory Card
10. Memory Cards