CAB M4 - FTP Printer Administration

97cab Produkttechnik GmbH & Co KG
M4
FTP Printer Administration
Using the File Transfer Protocol (FTP) you can send files over the network. For
the handling of files, you can use most common FTP programs (FTP-Clients),
with which files from a local computer or server can uploaded or downloaded,
deleted and overwritten.
With the FTP printer administration, the printer will function as an FTP Server.
NOTICE !
For administration of the printer, you must use an FTP Client that has
Binary data transfer available.
The FTP-Printer administration covers two functions :
- Manipulation of files on the memory card installed in the printer.
- FTP firmware update
FTP Log-on
To setup an FTP connection, you must connect to the server using an FTP
Client. The details on how to log-on depend on what client is being used. The
following information is required for the FTP Client :
1. The IP Address for the printer
2. User name / Password
username : "anonymous / any password
With this log-in you are able to display and download the files stored on
the memory card.
username : "root / password: PIN number of the printer
This log-in permits displaying, Upload and Download of memory card files
and FTP firmware update.
NOTICE !
For successful log-in with the "root" user name, the PIN number
must be preconfigured in the Printer's settings. This PIN number is
to be input during the FTP log-on as password.
Information of configuring the PIN number can be found in the Printer
Configuration section under Security.
If no PIN was assigned, this can be done using the printer's web-page
under the "Info" tab.
After the log-in is made, accessing the FTP-Server is similar to accessing a
Windows file.
10. Network Printer Functions