CAB M4 - Serial RS-232 Interface

33cab Produkttechnik GmbH & Co KG
M4 5. Installation
Serial RS-232 Interface
Windows 95/98/ME
1. Turn on the computer.
2. Quit any open applications.
3. Insert the "Printer Accessories CD A-Series/M-Series" into the CD-ROM
drive.
4. From the Start Menu, select Settings, Printers, Add Printer.
5. The Add Printer Wizard box will appear. Click "Next".
6. Select "Local printer" and click "Next".
7. Click "Have disk". Under "Copy manufacturers files from:", type
"D:\WINDRV\9X2000XP" (where D is the letter of your CD-ROM drive).
Click "OK".
8. Double-click on the model that matches your printer. Click "Next" to
proceed.
9. Select from the list of available ports a COM port. If necessary configure
the port (e.g. baud rate, handshake). Click "Next".
10. Change the printers name if necessary, and decide if the new printer
should be the standard printer. Click "Next".
11. In the folder "Printers" the icon of the new printer appears. The installation
has finished.
Windows NT 4.0
1. Turn on the computer.
2. Quit any open applications.
3. Insert the "Printer Accessories CD A-Series/M-Series" into the CD-ROM
drive.
4. From the Start Menu, select Settings, Printers, Add Printer.
5. The Add Printer Wizard box will appear. Click "Next".
6. Select "My Computer" and click "Next".
7. Select from the list of available ports a COM port. If necessary configure
the port (e.g. baud rate, handshake). Click "Next".
8. Click "Have disk". Under "Copy manufacturers files from:", type
"D:\WINDRV\NT40" (where D is the letter of your CD-ROM drive). Click
"OK".
9. Double-click on the model that matches your printer. Click "Next" to
proceed.
10. Change the printers name if necessary, and decide if the new printer
should be the standard printer. Click "Next".
11. In the next screen, choose not to share the printer.
12. Select if you want to print a test page. Click "Finish.
13. In the folder "Printers" the icon of the new printer appears. The installation
has finished.