EasyManua.ls Logo

CABAC UPS600DV3 - Operation

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customer Care Australia P: 133 122 F: 1300 303 310 E: sales@cabac.com.au W: cabac.com.au
A: 8 Distribuon Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: sales@cabac.co.nz W: cabac.co.nz
13
13 of 21
Operation
SwitchOnWiththeUPSpluggedin,pressthepowerswitchintoswitch
theUPSon.TheUPSwillperformaselftesteachtimeitisswitched
onandthebuzzerwillbeep2times.
Switch Off  By depressing the power switch. UPS will keep charging
batteries.
Backup (Beeping 1 time every 5 seconds)  When in Backup mode, the
battery illuminates and the UPS emits a beeping sound every four
seconds. Press the power switch to stop the beeping. The alarm
stopswhentheUPSreturnstonormalutilitymodeofoperation
Low Battery (Beeping 2 times every 1 second)  In Backup mode, when
the battery energy runs low, the UPS beeps rapidly until the UPS
shutsdownduetocompletebatterydischarge.
Overload(Beeping4timesevery2seconds)WhentheUPSisoverloaded
all three LED’s turn on and the buzzer beeps every 1 second.
Promptlydisconnectnonessentialloadequipmentfrom theUPSto
eliminate the overload, otherwise, the UPS will shut off output
power. The time for shutdown is determined by the size of the
overload
NOTE: If the UPS is working in battery mode, DO NOT turn on any
additionalloadssuchasacomputerormonitororreturnanyloads
fromsleep mode,otherwise, the UPSmay operateitsoverloador
shortcircuitprotection.