10
CAUTION! DO NOT USE ANY TOOL TO ATTACH REGULATOR / HOSE ASSEMBLY TO PROPANE TANK
3. Place the gas tank in the gas tank tray.
4. Secure the gas tank with the retention screw on the gas tank tray.
Step 5: Propane Gas Tank Installation
1. Attach propane gas tank to regulator inlet fitting by turning the regulator coupling clockwise as shown below.
2. LP gas cylinder must be fitted with a listed overfill prevention device (OPD).
Assembly Instruction continued
800
700
600
500
400
300
200
100
To Next Page
Loading...
