Cabletech URZ0336 - TIMESHIFT

Owner’s manual
24
EN
TIMESHIFT
This function ensures a continuous background recording of the selected channel.
MakesuretheashdriveisconnectedtotheUSBportofthedevice!
» Timeshift is activated by pressing the TIMEMSHIFT button on the remote control. You can set
timeshiftsizeinPVRConguremenu.Timeshiftwillbeactivated(statusbarwithcutdownwill
be displayed at the bottom of the screen).
» Use the REV/FWD/Play/Pause buttons on the remote control to control the playback
of the recorded video.
» To remove the status bar from the screen without disabling Timeshift, press the EXIT
buttonontheremotecontrol.Toturno󰀨theTimeshift,pressthe button on the remote
control.
2. Schedule a recording (EPG)
» Press the EPG button to open full listings.
» Select the TV channel using direction buttons.
» Select the TV program you want to record.
» PresstheOKbuttontoconrm.Awindowwillappear.Thereisnoneedtosetoptions
such as channel, start or end time as they were uploaded from the EPG. To schedule a
recording,select[RECORD]in[Mode]option.
3. Timer
» Press the TIMER button on the remote control.
» Press the red button on the remote control to add a new event.
» SetalltheoptionsandconrmbypressingtheOKbutton.
Notes:
» Compatibilitywithallashdrivesisnotguaranteed.
» Withlargeamountsofdata,itmaytakelongerforthesystemtoreadthecontentofaash
drive.
» Makesuretheleformatsaresupportedbythedevice.