Need help?Do you have a question about the Cactus Laser Trigger LV5 and is the answer not in the manual?
Explains triggering methods: blocking or removing laser between emitter and sensor.
Combines laser and RF tech for wireless flash triggering with V5/compatible models.
Specifies working distance between emitter and sensor up to 150 meters.
Device functions effectively even under strong sunlight.
Supports single, continuous, and bulb shots for creative photography.
Allows adjustable shutter delay and post-shutter freeze period.
Details and labels parts of the LV5 Emitter unit.
Details and labels parts of the LV5 Sensor unit.
Instructions for inserting AAA batteries into the LV5 Emitter and Sensor.
Details battery life for different operating modes and configurations.
Guidance on mounting the LV5 on light stands, tripods, or camera hot shoes.
How to adjust the tilt angle of the LV5 unit.
Instructions for attaching the hood to the sensor and storing the system.
Explanation of the 500Hz and 1KHz frequency options.
Describes the multi-functional dial for channel and delay/freeze settings.
Covers direct cable and wireless connections to cameras.
Initial steps before operating the LV5, including pairing.
How to use the LV5 to trigger a single camera shot when laser is interrupted.
How to use the LV5 to trigger multiple camera shots when laser is interrupted.
How to use LV5 to trigger a shot when an object moves away from the laser.
How to trigger multiple shots when an object moves away from the laser.
Procedure for optimizing LV5 performance in bright outdoor conditions.
Using LV5 with V5 transceivers for off-camera flash.
Recommended setups for LV5 with Cactus V5 wireless flash.
Explains Event, Shutter Open/Close signals, Delay, and Freeze functions.
How to set, disable, and reset Delay and Freeze values using the dial.
How Delay affects single shots after an event begins.
How Delay affects multi shots after event beginning and end.
How Freeze manipulates shutter signal duration for camera response.
How Freeze period affects shutter signals in multi-shot mode.
How Delay and Freeze work together for single shot sequences.
How Delay and Freeze work together for multi-shot sequences.
Procedure to determine the best Freeze time for camera response.
To Next Page
General