Cactus RF60X - Page 42

42
11.5
bar whenever a delay timer has
been set.
5. To turn off the delay timer,
follow steps 1-3 to set the delay
time to 0. The delay timer
indicator will then disappear
from the status bar on the main
screen.
AF-assist
The RF60X is equipped with an auto-
focus (AF) assist LED. The power
level of the AF-assist light can be
adjusted to best suit your working
environment.
1. To turn on and adjust the power of
the AF-assist light, press
and then press the button
until <AF PWR> (short form for
AF-assist power) is displayed.
Use the or button to adjust
the power level from 1 to 9. The
power level will apply to all
Local, Master and Slave modes.
2. To turn off the AF-assist light,
follow step 1 and set the
AF-assist power to 0.