45
right to adjust the power scale from -1EV
to 1EV. Press to return to the main
screen.
Note: The absolute power set up will not be
saved upon switching off the V6 TX. The V6 TX
will restart in relative power mode.
The control panel of the V6 TX offers three
EV step options: 1/10 EV, 1/3 EV, and 1/2 EV.
The conf iguration applies to both relative
and absolute power modes.
To adjust the EV step, switch on the V6 in TX
mode and press . Turn the selection dial
to <EV STEP>. Press and turn the dial to
t h e d e si r e d i n cr e m e n t le v el (1/10, 1 /3, o r
1/2). Press to conf irm.
Notes:
1. The selected EV step will be memorized
upon switching off and will be applied
when switching on again.
2. In the quick power adjustment mode
(s e e S e cti o n 1 2.1.3), t h e c o n f i g u r e d E V
step will be replaced by the 1EV step
cha n g es.
12.3
EV Step
To Next Page
Loading...
