To Next PageTo Next Page
Need help?Do you have a question about the CADDX RANGER 7600 and is the answer not in the manual?
Instructions on arming the security system using codes and the READY light status.
Procedure for disarming the security system after entering a protected area.
Method for bypassing open or unsecured zones using keypad commands.
Description of the Quick-Arm feature for simplified system arming.
Enables automatic bypassing of interior zones when the system is armed.
Allows for instant arming or entry delay by pressing the [*] key.
Procedure to bypass all zones designated as 'GROUP BYPASS'.
Allows arming the system without a green READY light illuminated.
Enables the system to automatically arm itself at a designated time.
Enables monitoring of pre-designated zones with a keypad beep.
Activates an alarm by pressing specific keys for emergencies.
Triggers a fire alarm alert by pressing specific keypad keys.
Activates an auxiliary alarm signal via specific key presses.
Details on designating and using zones for fire detection.
Enables a duress code for silent emergency alerts.
Instructions for programming Master and Auxiliary codes.
Step-by-step guide to changing the primary Master Code.
Procedure for programming auxiliary user codes 2 through 7.
How to perform a system reset in case of malfunction.
Power| operating power | 16.5 VAC 25 VA Transformer |
|---|---|
| auxiliary power | 12 VDC 500mA |
| alarm current available | 1 Amp |
Resistance and Response| loop resistance | 300 Ohms Maximum |
|---|---|
| loop response | Selectable to 500mS |
| operating temperature | 32 to 120 degrees F |
Dimensions and Weight| keypad dimensions width | 5.50" |
|---|---|
| keypad dimensions height | 4.25" |
| keypad dimensions depth | .850" |
| metal enclosure dimensions width | 11.25" |
| metal enclosure dimensions height | 11.25" |
| metal enclosure dimensions depth | 3.50" |
| shipping weight | 9 lbs. |
