7
KEYPAD CONTROL LIGHT INDICATORS
ARMED RED: On when system is armed; off otherwise. Flashes for alarm memory if alarm
was activated during arming cycle.
READY GREEN: On when all zones are secure or and/or Bypassed and the system is
ready to arm; off otherwise.
INSTANT RED: On when the entry/exit zones are instant; off otherwise.
POWER RED: On when AC power is on; off otherwise. Blinks when the system standby
battery is low.
ZONES YELLOW: Flashing means unsecure. Steady means bypassed. Off means secure.
KEYPAD CONTROL TONES (BEEPS)
A sounder is built into the keypad and may sound for any of the following reasons:
# Beeps for all keypresses.
# Sounds a continuous tone during the Entry delay time.
# Pulses when a dayzone is violated while the system is disarmed.
# Pulses when a FIRE zone has a trouble condition.
# Pulses when the armed status changes and the AC power is off.
# Beeps 3 times for trying to arm with the "READY" light off, if "FORCE ARMING" has not
been selected.
# Beeps 1 second for the "CHIME" feature.
# Beeps 1 second at the end of the exit delay.
When pulsing, the keypad sounder may be silenced by entering a valid code. The arm/disarm
state of your system will not change when entering a code to silence a pulsing keypad
sounder.
To Next Page
Loading...
