4
AUTOMATIC BYPASS OPTION
If checked, the "AUTOMATIC BYPASS" option has been selected by your installing company.
With this feature enabled, all interior zones will automatically bypass if you "ARM" your
security system and do not leave through a designated entry/exit door. The "AUTOMATIC
BYPASS" will occur at the end of the exit delay time. At this time, all bypassed "ZONE" lights
will become illuminated. With the interior zones bypassed, occupants are allowed the freedom
of movement inside of the Home/Business while the security system is "ARMED". Interior
zones that have been bypassed automatically can be unbypassed by pressing [first digit of the
Master Code]-[r].
INSTANT / DELAY OPTION
If checked, the "INSTANT" option has been selected by your installing company. With this
feature enabled, if you do not wish to have a delay on your entry/exit doors, this can be
accomplished by pressing the [r] key on your keypad while the system is "ARMED". At this
time, the "INSTANT" light will illuminate and there will be no entry delay when the entry/exit
doors are opened. Any time the "INSTANT" light is on and the exit delay has expired, the
opening of an entry/exit door will produce an immediate alarm, making this feature ideal when
a high level of security is desired, and no authorized entries are anticipated. By pressing the
[r] key again, the "INSTANT" light will turn off, and an entry delay will be present on
designated entry/exit doors.
NOTE: Your installing company may have programmed the "INSTANT" option to occur in
conjunction with the "AUTOMATIC BYPASS" feature. In this case, the "INSTANT" light and
the bypassed "ZONE" lights will become illuminated at the end of the exit delay. If this occurs,
you still have the ability to turn the "INSTANT" feature off, and/or on by pressing the [r] key.
GROUP BYPASS OPTION
If checked, the "GROUP BYPASS" option has been selected by your installing company. If
you wish to bypass all zones designated as "GROUP BYPASS" zones, you may do so by
entering [r]-[9]-[r] while the system is disarmed. Once these zones have been bypassed,
they will remain bypassed until the system is armed and disarmed.
FORCE ARMING OPTION
If checked, the "FORCE ARMING" option has been selected by your installing company.
Force arming allows the system to be armed without a green "READY" light illuminated. Any
zones that restore prior to the end of the exit delay will become active in the system, while
those zones that do not restore prior to the end of the exit delay will become bypassed zones.
Caution: If this feature is selected, an intrusion through one of the bypassed zones will not be
detected.
AUTOMATIC ARMING OPTION
If checked, the "Automatic Arming" option has been selected by your installing company. This
feature is used to make your system automatically arm itself at a designated time of day, if it
is not already armed. The keypad will sound a continuous tone for a 50 second time frame
before automatically arming. If a valid code is entered during this time frame, the system will
not automatically arm. When automatic arming occurs, all zones that are not secure, will
become bypassed.
To Next Page
Loading...