Heated
Seats
The buttons used
to
control this feature are
located on the front doors.
The engine must be
running for the heated seat
feature
to
work.
To heat the entire seat, press the horizontal button with
the heated seat symbol. Press the button
to
cycle
through the temperature settings of high, medium and
low and
to
turn the heated seat
off.
Indicator lights
will glow
to
designate the level of heat selected, three
for high, two for medium, and one
for
low.
The low setting warms the seatback and cushion until
the seat temperature
is
near body temperature. The
medium and high settings heat the seatback and seat
cushion
to
a slightly higher temperature. You will be able
to
feel heat in about two minutes.
To heat only the seatback, press the vertical button with
the heated seatback symbol. An indicator light
on
the
seatback button will glow to designate that only the
seatback is being heated. Additional presses of
the seatback button will cycle through the heat levels for
the seatback only. Press the horizontal button again
to
heat the whole seat.
The heated front seats will shut
off
automatically when
the ignition is turned
off.
Your
vehicle
also
has heated rear seats. See Heated
Seats
on
page
1-9.
1
-4
To Next Page
Loading...
