7.
Push and pull the child restraint in different
directions to be sure it is secure.
8.
If your vehicle has the passenger sensing system
and you’re using a rear-facing child restraint in this
seat, check
to
be sure the right front passenger’s
frontal air bag is
off
before you begin
to
drive. If the
air bag has been turned
off
the off indicator will
light and stay lit when the key is turned
to
RUN
or
START.
If the on indicator is lit, the passenger’s frontal air
bag has not been turned
off.
If
this ever happens,
turn the vehicle
off, unbuckle the safety belt
and perform the steps to install the rear-facing
restraint again. After restarting the vehicle,
if
the air
bag still doesn’t turn
off, install the infant restraint
in a rear seat position of the vehicle and have your
vehicle serviced as soon as possible.
To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety
belt will move freely again and be ready
to
work for an
adult or larger child passenger.
1-72
To Next Page
Loading...
