Cruise Control
These controls are
located on the end of
the multifunction lever.
9(Off): This position turns the system off.
R(On): This position turns the system on.
+ (Resume/Accelerate): Push the lever to this
symbol to make the vehicle resume to a previously
set speed or to accelerate when cruise is already
active.
T(Set/Decrease): Press this button to set the
speed or to decrease the speed when cruise
is already active.
With cruise control, you can maintain a speed of
about 25 mph (40 km/h) or more without
keeping your foot on the accelerator. This can
really help on long trips. Cruise control does not
work at speeds below about 25 mph (40 km/h).
{CAUTION:
Cruise control can be dangerous where
you cannot drive safely at a steady speed.
So, do not use your cruise control on
winding roads or in heavy traffic.
Cruise control can be dangerous on
slippery roads. On such roads, fast
changes in tire traction can cause
excessive wheel slip, and you could lose
control. Do not use cruise control on
slippery roads.
168
To Next Page
Loading...
Need help?
General
