Rear Underseat Fuse Block
To access the rear underseat fuse blocks, you will
have to first remove the rear seat cushion.
Removing the Rear Seat Cushion
Notice: If, when removing or reinstalling the
rear seat, you do not do it carefully, you
could damage the fuse center. Avoid contact
between the rear seat and the fuse center
whenever you remove or reinstall the rear seat.
To remove the rear seat cushion, do the following:
1. Pull up on the front of the cushion to release
the front hooks.
2. Pull the cushion up and out toward the front
of the vehicle.
3. Slide the cushion out one of the rear doors
and set it aside.
Rear Pass-Through Seat
451
To Next Page
Loading...
Need help?
General
