Cadillac 2012 SRX - Replacement

Black plate (27,1)
Cadillac SRX Owner Manual (Include Mex) - 2012
Vehicle Care 10-27
Front Wiper Blade
Replacement
To replace the wiper blade
assembly:
1. Pull the windshield wiper
assembly away from the
windshield.
2. Press the button in the middle of
the wiper arm connector, and
pull the wiper blade away from
the arm connector.
3. Remove the wiper blade.
4. Reverse steps 1 through 3 for
wiper blade replacement.
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm
have a cover for protection. The
cover must be removed before the
wiper blade can be replaced.
To remove the cover:
1. Slide a plastic tool under cover
and push upward to unsnap.
2. Slide cover towards wiper blade
tip to unhook from blade
assembly.
3. Remove the cover.
4. After wiper blade replacement,
ensure that cover hook slides
into slot in blade assembly.
5. Snap cover down to secure.
To remove the wiper blade:
1. Lift the wiper arm away from
the windshield.
A. Wiper Arm
B. Release Lever
C. Blade Assembly
2. Push the release lever (B) to
disengage the hook and push
the wiper arm (A) out of the
blade assembly (C).
3. Push the new blade assembly
securely on the wiper arm until
the release lever clicks into
place.
4. Replace wiper cover.