In Brief 9
2. Immediately press and hold /
for at least four seconds or until
the turn signal lamps flash.
3. After entering the vehicle
during a remote start, press the
POWER
O button with the
brake pedal applied to operate
as normal.
When the vehicle starts, the parking
lamps will turn on.
Remote start can be extended.
Canceling Remote Start
To cancel a remote start, do any of
the following:
.
Press and hold
/ until the
parking lamps turn off.
.
Turn on the hazard warning
flashers.
.
Press the POWER
O button with
the brake pedal applied, then
press the POWER
O button
again to turn the vehicle off.
See Remote Start 0 36.
Door Locks
To lock or unlock the doors from the
outside, press
Q or K on the RKE
transmitter. See Remote Keyless
Entry (RKE) System Operation 0 31.
For Keyless Access, the RKE
transmitter must be within 1 m (3 ft)
of the door handle sensor (1). Grip
and press to open.
To lock or unlock the door from the
inside, press the power door lock
switch (2).
To open the door press the door
latch button (3). If the vehicle is
stationary, the door latch button
unlatches an unlocked door.
See Door Locks 0 38.
If the vehicle has lost battery power,
the doors can be opened manually.
See Power Door Locks 0 39.
Trunk Release
To open the trunk, the vehicle must
be off or the shift lever must be in
P (Park).
.
Press
| on the driver door.