Instruments and Controls 105
Reconfigurable Instrument
Cluster
There are four uplevel instrument
cluster display configurations to
choose from: Classic, Modern,
Classic Enhanced, or Modern
Enhanced.
Classic
Modern
Classic Enhanced
Modern Enhanced
Use the five-way control on the right
side of the steering wheel to move
between the different display zones
and scroll through the different
displays.
To change the cluster configuration:
1. Press
S to access the cluster
applications.
2. Use
y or z to scroll through
the list until Display Layout is
highlighted. Then press SEL to
select it.
3. Each layout in the menu is
represented by a small preview
image of the display layout.
Scroll up or down and highlight
the selection. Press SEL to
select the desired cluster
configuration.
4. Exit the Display Layout menu
by pressing
S.
Cluster Menu
There is an interactive display area
in the center of the instrument
cluster.
To Next Page
Loading...
