Acknowledge/OK: This command instructs the
system to clear a Driver Information Center
(DIC) warning message from the screen when
displayed. See “DIC Warnings and Messages” in
Section 3 of your vehicle’s owner manual for
more information.
Radio: This command instructs the system to
display the Radio screen. Once the screen
is displayed, you can use other radio commands.
See “Radio Commands” later in this section
for more information.
Audio Mode: This command instructs the system
to display the Audio screen. See “Setting the
Tone” under Navigation Audio System on page 64
for more information.
CD Player: This command instructs the system to
display the CD player screen. Once the screen
is displayed, you can use other CD player
commands. See “CD Commands” later in this
section for more information.
CD Changer: This command instructs the system
to display the CD changer screen. Once the
screen is displayed, you can use other CD changer
commands. See “CD Commands” listed later in
this section for more information.
DVD: This command instructs the system to
display the DVD player screen. Once the screen is
displayed, you can use other DVD commands.
See “DVD Commands” later in this section
for more information.
Navigation: This command instructs the system
to display the navigation startup screen. This
screen will only be displayed the first time
navigation is accessed. Once the navigation
system is active, you can use other navigation
commands. See “Navigation Commands” later in
this section for more information.
Setup: This command instructs the system to
display the Setup menu. See Setup Menu
on page 27.
Main Menu: This command instructs the system
to display the Main Menu screen. Once the
screen is displayed, you can use other Main Menu
commands.
Information: This command instructs the system
to display the Vehicle Information menu. See
Driver Information Center (DIC) on page 117 for
more information.
95